tube sheet

The results show that, Mori-Tanaka method has high accuracy in thick tube sheet which the fiber volume fraction is less than 0.5.We used double-tube sheet as the application example of micromechanics in structural analysis, set up the equivalent model.

结果表明，Mori-Tanaka方法在管束体积分数小于0.5的厚管板中具有较高的计算精度。以双管板作为细观力学方法在结构分析中的应用实例，建立起等效模型。

By using corrugated pipe bundle instead of the bare pipe bundle with the same stiffness as its tube sheet, the axial thermal compensation can be increased by 40.4 percent, and the corresponding pulling-out force is 53.2 percent of that of the bare pipe bundle.

在光管管束与壳体等刚度条件下，用波节管管束代替光管管束，轴向热补偿量可提高404%，相应的拉脱力为光管管束的532%。

evaluation method for structural strength of asymmetric double tube sheet of marine condenser

舰用冷凝器非对称布管双管板结构强度评估方法研究

The leading and trailing inserted tube for air coolant on an aeroengine is a thin wall component, it is made of Inconel 625 alloy sheet ( thickness 02mm).

航空燃气涡轮发动机前后冷气导管是一薄壁（δ＝0.2mm）零件，材质为Inconel625高温合金。

The only components required, though, are a sheet of clear or slightly milky plastic, six feet of plastic tube, and a container — perhaps just a drinking cup — to catch the water ．

不过,所需的部件只有一张透明或略带乳白色的塑料板、六英尺长的塑料管和一个接水的容器——饮水杯即可。

It is hard to make an analysis of the temperature field and stress field in the tube sheet and cylinder of a waster heat boiler owing to asymmetric arrangement of the heat exchange tube.

废热锅炉换热管分布的不对称性，使得管板和筒体等部件的温度场与应力场分析十分困难。

It should be modified to be strength weld and tight expansion structure. At the same time, manufacturing technology as modified for welding after expansion, tube sheet base should adopt the material of strength σ_s ≥ 320MPa.

建议改为强度焊加贴胀结构，并将复合管板基层改用屈服强度≥320MPa的材料，制造工艺改为先胀后焊。

Stationary non-instantaneous electric water heater fixed tube sheet type heat exchanger

固定非即热式电热水器

Finite element analysis on thick tube sheet by adopting entity model

采用实体模型的厚管板的有限元分析

Bowsprit shroud plate fixed tube sheet type heat exchanger

船首斜桁张索固定板固定管板式热交换器

Heat exchangers, other than the double concentric tube type or double tube sheet type, must employ a pressure differential and a means for monitoring the differential.

热交换器（除了双同心管换热器或双管板列管换热器）必须使用压力差，并有方法对压力差进行监控。

Study on the Relationship between Technological Parameters of Tube Sheet Cut Tobacco Dryer and Tar Content of Cigarette

管板式烘丝机工艺参数与卷烟焦油释放量的关系研究

The welding process of nickel base welding wire for tube to tube sheet used in HP heater of330 MW and above power unit has been described in the article.

本文依据工程实践经验，介绍了镍基合金、石墨、钢衬聚四氟乙烯三种材料的应用防腐情况、使用条件，对于氟化选材有指导意义。

Deflection analysis of a tube-sheet with reinforcing ribs and double periodic pattern of circular holes in a nuclear reactor

核反应堆正方栅格双向加肋管板结构挠度分析

Can you spot weld a tube to a sheet metal?

你能把一个钢管点焊到钢板上吗？

Finite Element Stress Analysis for Structure of Waste Heat Boiler Tube Sheet in Sulfur Recovery Device

硫磺回收装置之废热锅炉管板结构有限元应力分析

The principle, configuration and structure of automatic welding for tube and tube sheet joints are introduced.

介绍了管子与管板的角环焊缝所采用的全自动钨极氩弧焊机的结构 、 组成和工作原理.

Engineers adopt some effective supporting measures to strengthening foundation pit in a underground garage, such as tube well dewatering, anchored sheet pile wall method, and soil nail wall combined with prestressed anchor, etc.

介绍了某地下停车库工程采用管井降水方案和桩锚支护，土钉墙与预应力锚索相结合的支护方案，取得了较好效果。

Numerical Simulation on Temperature Field in Tantalum Tube and Ta/ 16 MnR Clad Sheet Welded Joint

钽换热器管板焊接接头温度场数值模拟